Vinyl siding cost can vary widely based on the manufacturer (Alside, CertainTeed, Napco, etc.), the specific product type (Premium Dutch Lap, Vinyl Shake, Board & Batten, etc.) , warranty details, the thickness of siding, the installer you use, the scope of your project -- the list goes on and on. Because there are so many options to choose from, it is difficult to provide a specific vinyl siding cost comparison.
We will attempt to breakdown the costs associated with vinyl, from purchase to installation to maintenance, and compare it with other exterior siding products. Typically, vinyl siding cost ranges from $0.45 to $1.90 per square foot. For a 2,300 square foot home, you will need approximately 3,200 square feet of siding, leading to a cost of $7,575 to $11,575 for material costs. For a typical job, installation will normally cost about $1.60 per square foot.
There is a range of pricing when it comes to vinyl siding. Cheaper costs may be attractive, but you should know what you are getting for the price. Listed below are some of the factors that you should consider when purchasing vinyl:
Typically, the cost can range from $0.45 to $1.90 per square foot. For a 2,300 square foot home, you will need approximately 3,200 square feet of siding, leading to a cost of $7,575 to $11,575 for material costs.
In comparison, fiber cement siding can range from $0.84 to $2.55 per square foot, while wood panels can go for $0.67 to $3.46 per square foot. The most expensive siding option is often brick or stone masonry. They can cost anywhere from $2.46 to more than $10 per square foot.
Installation costs for any exterior siding depends on the quality of the contractor, the architecture of your home, and whether you choose to take on the project yourself. Take advantage of our vinyl siding cost estimator.
For typical products, installation will normally cost about $1.60 per square foot. It is a much easier process for vinyl than other products, making it a far cheaper choice. Cedar clapboard siding requires painting and more labor time, which costs about 2.5 times more than vinyl to install.
For do-it-yourself installation, you can install vinyl siding for as little as $1 per square foot. As with material costs, cheaper is not necessarily better. Using a contractor for installation will ensure that you will enjoy the longest life span for your vinyl.
One of the most attractive options for vinyl siding is a reduction in time and money spent on maintaining your home's exterior. The only maintenance that is required is an occasional washing of any dirt and grime that has built up on the panels.
Natural wood siding requires repainting and can be susceptible to insect and water damage. Fiber siding also requires repainting and periodic maintenance. Brick or stone siding needs less maintenance than vinyl siding, but is a far more expensive choice for your home.
Here are a couple of more things to consider for your home's exterior: